Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
mask
Enter the mask of the IP address in the slash prefix length
format (for example, /24). The mask appears in command
outputs in dotted decimal format (A.B.C.D).
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
then the name
of an established route map.
If the route map is not configured, the default is
deny
(to
drop all routes).
Defaults
Not configured.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The software resolves the network address configured by the
network
command
with the routes in the main routing table to ensure that the networks are reachable
using non-BGP routes and non-default routes.
Related
Commands
redistribute
— redistributes routes into BGP.
network backdoor
Specify this IGP route as the preferred route.
Syntax
network
ipv6-address prefix-length
backdoor
To remove a network, use the
no network
ipv6-address prefix-length
backdoor
command.
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Defaults
Not configured.
740
IPv6 Border Gateway Protocol (IPv6 BGP)
