Field
Description
VlanAclOpt
Number of FP blocks for ACL VLAN
optimzation feature.
Example
Dell#show cam-acl-vlan
-- Chassis Vlan Cam ACL --
Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 2
VlanHp : 1
VlanFcoe : 1
VlanAclOpt : 0
-- Stack unit 0 --
Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 2
VlanHp : 1
VlanFcoe : 1
VlanAclOpt : 0
cam-acl-vlan
Allocate the number of flow processor (FP) blocks or entries for VLAN services and processes.
Syntax
cam-acl-vlan { default | vlanopenflow <0-2> | vlaniscsi <0-2> |
vlanaclopt <0-2>
Parameters
default
Reset the number of FP blocks to default. By default, 0
groups are allocated for the ACL in VCAP. ACL VLAN groups
or CAM optimization is not enabled by default, and you need
to allocate the slices for CAM optimization.
vlanopenflow
<0-2>
Allocate the number of FP blocks for VLAN open flow
operations.
vlaniscsi <0-2>
Allocate the number of FP blocks for VLAN iSCSI counters.
vlanaclopt
<0-2>
Allocate the number of FP blocks for the ACL VLAN
optimization feature.
Default
If you use the
default
keyword with the
cam-acl-vlan
command, the FP blocks
allocated for VLAN processes are restored to their default values. No FP blocks or
dynamic VLAN Content Aware Processor (VCAP) groups are allocated for VLAN
operations by default.
Command
Modes
CONFIGURATION
290
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
