tag
value
(OPTIONAL) Enter the keyword
tag
then a tag value number.
The range is from 1 to 4294967295.
permanent
(OPTIONAL) Enter the keyword
permanent
to specify that
the route is not to be removed, even if the interface assigned
to that route goes down.
NOTE: If you disable the interface with an IPv6 address
associated with the keyword
permanent
, the route
disappears from the routing table.
Defaults
none
Command
Modes
CONFIGURATION
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
When the interface goes down, the system withdraws the route. The route is re-
installed by the system when the interface comes back up. When a recursive
resolution is “broken,” the system withdraws the route. The route is re-installed by
the system when the recursive resolution is satisfied.
After an IPv6 static route interface is created, if an IP address is not assigned to a
peer interface, the peer must be manually pinged to resolve the neighbor
information.
Example
Dell(conf)#ipv6 route ?
X:X:X:X::X IPv6 prefix x:x::y
Dell(conf)#ipv6 route 44::0 ?
/nn /nn Mask in slash format
Dell(conf)#ipv6 route 44::0 /64 ?
X:X:X:X::X Forwarding router's address
gigabitethernet Gigabit Ethernet interface
loopback Loopback interface
null Null interface
port-channel Port-Channel interface
tenGigabitethernet TenGigabit Ethernet interface
fortyGigE FortyGigabit Ethernet interface
tunnel Tunnel interface
vlan Vlan interface
Dell(conf)#ipv6 route 44::0 /64 33::1 ?
<1-255> Distance metric for this route
permanent Permanent route
tag Set tag for this route
Dell(conf)#ipv6 route 44::0 /64 33::1
Dell(conf)#ipv6 route 44::0 /64 tengigabitethernet 0/1 ?
X:X:X:X::X Forwarding router's address
Dell(conf)#ipv6 route 44::0 /64 tengigabitethernet 0/1 66::1
Dell(conf)#
Related
Commands
show ipv6 route
— views the IPv6 configured routes.
682
IPv6 Basics
