description
Configure a short text string describing the VRRP group.
Syntax
description
text
To delete a VRRP group description, use the
no description
command.
Parameters
text
Enter a text string up to 80 characters long.
Defaults
Not enabled.
Command
Modes
VRRP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
disable
Disable a VRRP group.
Syntax
disable
To re-enable a disabled VRRP group, use the
no disable
command.
Defaults
Enabled.
Command
Modes
VRRP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To enable VRRP traffic, assign an IP address to the VRRP group using the
virtual-address
command and enter
no disable
.
Related
Commands
virtual-address
— specifies the IP address of the virtual router.
hold-time
Specify a delay (in seconds) before a switch becomes the MASTER virtual router. By delaying the
initialization of the VRRP MASTER, the new switch can stabilize its routing tables.
Syntax
hold-time {
seconds
| centisecs
centisecs
}
To return to the default value, use the
no hold-time
command.
1348
Virtual Router Redundancy Protocol (VRRP)
