• A successful match with a continue clause, the route map executes the set
clauses and then goes to the specified route map entry upon execution of the
continue clause.
• If the next route map entry contains a continue clause, the route map executes
the continue clause if a successful match occurs.
• If the next route map entry does not contain a continue clause, the route map
evaluates normally. If a match does not occur, the route map does not
continue and falls through to the next sequence number, if one exists.
Set Clause with Continue Clause
If the route-map entry contains sets with the continue clause, set actions are
performed first then the continue clause jumps to the specified route map entry.
• If a set action occurs in the first route map entry and then the same set action
occurs with a different value in a subsequent route map entry, the last set of
actions overrides the previous set of actions with the same
set
command.
• If
set community additive
and
set as-path prepend
are configure, the
communities and AS numbers are prepended.
Related
Commands
set metric
— Specifies a COMMUNITY attribute
set automatic-tag
— Configures a filter to modify the AS path
description
Add a description to this route map.
Syntax
description
description
Parameters
description
Enter a description to identify the route map (80 characters
maximum).
Defaults
none
Command
Modes
ROUTE-MAP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
route-map
— Enables a route map.
Access Control Lists (ACL)
201
