Parameters
Default
Enter the keyword
default
to make all OSPF interfaces
(current and future) passive.
interface
Enter the following keywords and slot/port or number
information:
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a VLAN, enter the keyword
vlan
then a number from
1 to 4094.
Command
Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command
History
Version 9.2(0.0)
Added support for OSPFv3.
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
By default, no interfaces are
passive
. Routing updates are sent to all interfaces on
which the routing protocol is enabled.
If you disable the sending of routing updates on an interface, the particular address
prefix continues to be advertised to other interfaces, and updates from other
routers on that interface continue to be received and processed.
OSPFv3 for IPv6 routing information is not sent or received through the specified
router interface. The specified interface address appears as a stub network in the
OSPFv3 for IPv6 domain.
redistribute
Redistribute information from another routing protocol into OSPFv3 throughout the OSPF process.
Syntax
redistribute {bgp
as number
}{connected | static}[metric
metric-
value
| metric-type
type-value
] [route-map
map-name
] [tag
tag-
value
]
To disable redistribution, use the
no redistribute {connected | static}
command.
Open Shortest Path First (OSPFv2 and OSPFv3)
997
