Dell MXL 10GbE Reference Manual Download

Page: 869 / 1545

packet

(OPTIONAL) Enter the keyword

packet

to display

information regarding packets coming in or going out.

brief

(OPTIONAL) Enter the keyword

brief

to display brief packet

information.

detail

(OPTIONAL) Enter the keyword

detail

to display detailed

packet information.

(OPTIONAL) Enter the keyword

to display transmit-only

packet information.

(OPTIONAL) Enter the keyword

to display receive-only

packet information.

both

(OPTIONAL) Enter the keyword

both

to display both receive

and transmit packet information.

Defaults

none

Command
Modes

EXEC Privilege

Command
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

disable

Enable or disable LLDP.

Syntax

disable

To enable LLDP, use the

no disable

command.

Defaults

Enabled, that is

no disable

Command
Modes

CONFIGURATION (conf-lldp) and INTERFACE (conf-if-

interface

-lldp)

Command
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Related
Commands

protocol lldp (Configuration)

— enables LLDP globally.

debug lldp interface

— debugs LLDP.

Link Layer Discovery Protocol (LLDP)

869

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MXL 10GbE

Reviews:

Related manuals for MXL 10GbE

Brands by name

Popular brands

Dell MXL 10GbE, Reference Manual

Search results

Summary of Contents for MXL 10GbE

Reviews:

Related manuals for MXL 10GbE

Brands by name

Popular brands