Defaults
Not configured.
Command
Modes
ROUTER OSPF
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
ip ospf priority
To determine the designated router for the OSPF network, set the priority of the interface.
Syntax
ip ospf priority
number
To return to the default setting, use the
no ip ospf priority
command.
Parameters
number
Enter a number as the priority. The range is from 0 to 255.
The default is
1
.
Defaults
1
Command
Modes
INTERFACE
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Setting a priority of 0 makes the router ineligible for election as a designated router
or backup designated router.
Use this command for interfaces connected to multi-access networks, not point-
to-point networks.
ip ospf retransmit-interval
Set the retransmission time between lost link state advertisements (LSAs) for adjacencies belonging to the
interface.
Syntax
ip ospf retransmit-interval
seconds
To return to the default values, use the
no ip ospf retransmit-interval
command.
Parameters
seconds
Enter the number of seconds as the interval between
retransmission. The range is from 1 to 3600. The default is
5
seconds
.
Open Shortest Path First (OSPFv2 and OSPFv3)
943
