To return to the default setting, use the
no bgp soft-reconfig-backup
command.
Defaults
Off
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
When you enable soft-reconfiguration for a neighbor and you execute the
clear
ip bgp soft in
command, the update database stored in the router is replayed
and updates are re-evaluated. With this command, the replay and update process is
triggered only if route-refresh request is not negotiated with the peer. If the
request is indeed negotiated (after executing the
clear ip bgp soft in
command), BGP sends a route-refresh request to the neighbor and receives all of
the peer’s updates.
Related
Commands
clear ip bgp
— activates inbound policies without resetting the BGP TCP session.
capture bgp-pdu neighbor
Enable capture of an IPv4 BGP neighbor packet.
Syntax
capture bgp-pdu neighbor
ipv4-address
direction {both | rx |
tx}
To disable capture of the IPv4 BGP neighbor packet, use the
no capture bgp-
pdu neighbor ipv4-address
command.
Parameters
ipv4-address
Enter the IPv4 address of the target BGP neighbor.
direction {both
| rx | tx}
Enter the keyword
direction
and a direction — either
rx
for inbound,
tx
for outbound, or both.
Defaults
Not configured.
Command
Modes
EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
capture bgp-pdu max-buffer-size
— specifies a size for the capture buffer.
show capture bgp-pdu neighbor
— displays BGP packet capture information.
Border Gateway Protocol IPv4 (BGPv4)
327
