show running-config lldp
— displays the LLDP running configuration.
advertise med power-via-mdi
To advertise the Extended Power via MDI TLV, configure the system.
Syntax
advertise med power-via-mdi
To return to the default, use the
no advertise med power-via-mdi
command.
Defaults
unconfigured.
Command
Modes
CONFIGURATION (conf-lldp)
Command
History
Version 8.3.16.1
Usage
Information
Advertise the Extended Power via MDI on all ports that are connected to an 802.3af
powered, LLDP-MED endpoint device.
Related
Commands
debug lldp interface
— debugs LLDP.
show lldp neighbors
— displays the LLDP neighbors.
show running-config lldp
— displays the LLDP running configuration.
advertise med softphone-voice
To advertise softphone to enable IP telephony on a computer so that the computer can be used as a
phone, configure the system.
Syntax
advertise med softphone-voice {
vlan-id
} | {priority-tagged
number
}
To return to the default, use the
no advertise med softphone-voice
{
vlan-id
} | {priority-tagged
number
}
command.
Parameters
vlan-id
Enter the VLAN ID. The range is from 1 to 4094.
priority-tagged
number
Enter the keywords
priority-tagged
then the Layer 2
priority. The range is from 0 to 7.
Defaults
unconfigured.
Command
Modes
CONFIGURATION (conf-lldp)
Link Layer Discovery Protocol (LLDP)
877
