• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
Defaults
Not configured.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
terminal xml
Enable XML mode in Telnet and SSH client sessions.
Syntax
terminal xml
To exit XML mode, use the
terminal no xml
command.
Defaults
Disabled
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command enables the XML input mode where you can either cut and paste
XML requests or enter the XML requests line-by-line. For more information about
using the XML feature, refer to the XML chapter in the
Dell Networking OS
Configuration Guide
.
traceroute
View a packet’s path to a specific device.
Syntax
traceroute {
host
|
ip-address
}
Control and Monitoring
121