• Up at 100 Mb/s
• Down
• Down
* You cannot disable auto-negotiation when the speed is set to 1000 or auto.
Related
Commands
speed (for 1000/10000 interfaces)
— sets the link speed to 1000, 10000, or auto-
negotiate the speed.
portmode hybrid
To accept
both
tagged and untagged frames, set a physical port or port-channel. A port configured this
way is identified as a hybrid port in report displays.
Syntax
portmode hybrid
To return a port to accept
either
tagged or untagged frames (non-hybrid), use the
no portmode hybrid
command.
Defaults
non-hybrid
Command
Modes
INTERFACE (conf-if-
interface-slot/port
)
Command
History
Version 9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the
interface
command shown in the following
example. This example sets a port as hybrid, makes the port a tagged member of
VLAN 20, and an untagged member of VLAN 10, which becomes the native VLAN
of the port. The port now accepts:
• untagged frames and classify them as VLAN 10 frames
• VLAN 20 tagged frames
The following describes the
do show interfaces
command shown in the
following example. This example shows output with “Hybrid” as the newly added
value for 802.1QTagged. The options for this field are:
• True — port is tagged
• False — port is untagged
• Hybrid — port accepts both tagged and untagged frames
The following describes the
interface vlan
command shown in the following
example. This example shows unconfiguration of the hybrid port using the
no
portmode hybrid
command.
576
Interfaces