capture bgp-pdu max-buffer-size
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
Syntax
capture bgp-pdu max-buffer-size
100-102400000
Parameters
100-10240000
0
Enter a size for the capture buffer.
Defaults
40960000 bytes
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
capture bgp-pdu neighbor (ipv6)
— enables route reflection between the route
reflector and the clients.
show capture bgp-pdu neighbor
— configures a route reflector and clients.
clear ip bgp * (asterisk)
Reset all BGP sessions in the specified category. The soft parameter (BGP Soft Reconfiguration) clears the
policies without resetting the TCP connection.
Syntax
clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast
soft [in | out] | soft [in | out]]
Parameters
*
Enter an asterisk (
*
) to reset all BGP sessions.
ipv4 multicast
soft [in | out]
(OPTIONAL) Enter the keywords
ipv4 multicast soft
[in | out]
to set options within the specified IPv4 address
family.
ipv6 unicast
soft [in | out]
(OPTIONAL) Enter the keywords
ipv6 multicast soft
[in | out]
to set options within the specified IPv6 address
family.
soft
(OPTIONAL) Enter the keyword
soft
to configure and
activate policies without resetting the BGP TCP session, that
is, BGP Soft Reconfiguration.
NOTE: If you enter
clear ip bgp ip6-address
soft
, both inbound and outbound policies are reset.
in
(OPTIONAL) Enter the keyword
in
to activate only inbound
policies.
708
IPv6 Border Gateway Protocol (IPv6 BGP)
