BlueHub User Manual
Thank you for purchasing BlueHub! BlueHub is a Bluetooth hub which,
when paired with InvoTek’s MultiAccess Android app, enables the user
to control up to four personal electronic devices via one input device.
The Android input device runs the MultiAccess Android app. The app
provides an on-screen keyboard and cursor control and enables the
user to select which connected device they wish to control. When the
user makes a keyboard selection or cursor movement in MultiAccess,
the command is sent via Bluetooth to the selected device through
BlueHub. To the connected devices, BlueHub
looks like a normal Bluetooth keyboard and/or
mouse.
Left Side of BlueHub
2
Input Switches
There are two switch jacks and buttons labeled SW1 and SW2.
BlueHub can use these switch inputs to perform scanning within the
MultiAccess app. MultiAccess provides sophisticated settings to
improve switch access for a user. BlueHub accepts any 3.5mm mono
switch output, such as a push-button switch or the output of a Sip-and-
Puff switch. The small buttons beside each switch jack are there for
convenience to test the functionality of switches during setup –
pressing a button is identical to activating its associated switch.
Figure 1:
Left View
