background image

852-111

7

532

5-Port 100Base-TX Industrial Eco Switch

5

4

3

2

1

100

LNK/ACT

+18~30V DC

 +     -    

PWR

The 852-111 has 5 ports with each port featuring Auto-negotiation and auto 
MDI/MDI-X detection. Existing 10Mbps networks can now be upgraded 
effortlessly to higher speed 100Mbps Fast ETHERNET networks. 
The 852-111 5-port density can be used to create multiple segments to 
alleviate client congestion and provide dedicated bandwidth to each user 
node. The 852-111 is a cost-effective solution to keep up with the constant 
demands for emerging IP-based industry communication needs. 
The switch can be easily configured and installed and is also ideally suited for 
small to medium-sized networks.

Features:

• 5-port 10/100 Mbps Auto-negotiation ETHERNET ports
• Comprehensive front-panel diagnostic LEDs
• Supports  Auto-MDI/MDI-X
• Full/half-duplex transfer modes for each port
• Wire speed reception and transmission
• Store-and-forward switching method
• Integrated address Look-Up Engine, supports 2K absolute MAC addresses
• Supports surge protection
• IEEE 802.3x flow control for fullduplex
• Supports  DIN  35  rail

Description

Item No.

Pack. 
Unit

5-Port 100Base-TX Industrial Eco Switch

852-111

1

Accessories

Item No.

Carrier Rail Adapter for DNV Approval

852-9101

Approvals

Conformity marking

1

Korea Certification
Marine applications

DNV (only with 852-9101 Carrier Rail 
Adapter)

r

 UL 508

 

Technical Data

Ports

5 x 10/100Base-TX (RJ-45)

Standards

IEEE 802.3 10Base-T; 
IEEE 802.3u 100Base-TX/FX; 
IEEE 802.3x Flow Control

Topology

Star

LED

each device: 
1 x Power (PWR), green; 
each port: 
1 x Link/Activity (LNK/ACT), green; 
1 x 10/100 Mbps, green

Supply voltage

18 V ... 30 V DC

Energy consumption max.

3 W

Operating temperature

-40 °C ... +70 °C
DNV: -25°C ... +70°C

Storage temperature

-40 °C ... +80 °C

Relative air humidity (no condensation)

95 %

Dimensions (mm) W x H x L

23.4 x 73.8 x 109.2
Height from upper-edge of DIN 35 rail

Fixing

DIN 35 rail

Weight

180 g

WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes                              26.01.2016

           Postfach 2880 - D-32385 Minden 

        Hansastr. 27 - D-32423 Minden

Tel.: +49(0)571/887-0        E-Mail: [email protected] 

Fax: +49(0)571/887-169              www.wago.com

Summary of Contents for 852-111








































Reviews: