Auerswald COMpact 5000 Operation Manual Download

Page: 685 / 932

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

685

Settings

System messages

Monitoring System Messages

Monitoring System Messages

Proceed as follows:

•

Using the Configuration Manager (

Monitoring

)

Every event that occurs in the PBX is logged in a list with up to 2000 entries per category and
displayed in chronological order.

Notes:

The page is not refreshed automatically.

When the maximum number of entries is exceeded, old entries in the same
category are automatically deleted.

If you update your firmware from Version 6.4 to 6.6, old log files are grouped
to form a *.tar archive in the SFTP range.

SELECTED FILTER

All events

: All the events in the list are displayed.

e.g.

system information

: Only events in the selected category (e.g. system information) are

displayed.

Free text input

: Events whose

Notification

column contains the text input here are displayed.

Date - Time

PBX date and time at which the system event occurred

Category

System event category: System information, Simple malfunction, Serious malfunction, Security
warning

Notification

More detailed information about the system event (in English, no matter what language is used
in the Configuration Manager)

Print

The print preview now opens.

Summary of Contents for COMpact 5000





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5000

Reviews:

Related manuals for COMpact 5000

Brands by name

Popular brands

Auerswald COMpact 5000, Operation Manual

Search results

Summary of Contents for COMpact 5000

Reviews:

Related manuals for COMpact 5000

Brands by name

Popular brands