manualshive.com logo in svg

Auerswald COMpact 5000, Operation Manual

The comprehensive Instructions Manual for the high-performance Auerswald COMpact 5000 is available for free download at manualshive.com. This manual provides a detailed guide on how to maximize the functionality of this exceptional product, ensuring seamless integration and optimal performance for your business communication needs.

Share
Download
background image

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

457

Functions

Relays (Actuators)

Relay Operating Modes

Music on hold

The relay is assigned to music on hold.

The PBX switches on the relay when a call is to be transferred or in the case of a query call, 
when a communication partner waiting in the background is to hear music on hold.

The PBX switches off the relay after the defined switching duration.

Possible use:

•

Playback of music on hold during a transfer or a query.

PC relay

The relay is assigned to a subscriber.

The PBX switches on the relay as soon as the assigned subscriber is being called.

Alternatively, switching can be triggered manually by telephone.

The PBX switches off the relay after the defined switching duration.

Possible use:

•

Switching a PC

Second ringer

The relay is assigned to a subscriber, a group or a door call.

The PBX switches on the relay as soon as the assigned subscriber or group is being called, or 
at the start of a door call.

The PBX switches off the relay at the end of the call.

Possible use:

•

Switching a second ringer

Configuration dependent

The relay is assigned to one or more configuration/s (day, night, etc.).

The PBX switches on the relay as soon as an assigned configuration is switched on.

The PBX switches off the relay as soon as a configuration to which it is not assigned is switched 
on.

Alternatively, switching on/off can be triggered manually by telephone.

Slave relay

The relay is assigned to another relay (master).

The PBX switches the relay together with the assigned relay.

Summary of Contents for COMpact 5000





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for COMpact 5000

Well mPBX-100 User Manual preview
mPBX-100
Brand: Well Pages: 140
Gigaset Pro series Hybird 120 Manual preview
Pro series Hybird 120
Brand: Gigaset Pages: 423

Brands by name

Popular brands

Load more brands