COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
517
Functions
Door Functions
Creating a Door Terminal
To reset the door terminal to the default settings of the device template,
delete the door terminal on page
Devices > Device wizard
and create the
door terminal again.
Creating a VoIP Door Terminal
Requirements:
•
Door terminal (optional, see chapter Important Information > Product Details > Basic
Assembly and Extensions)
1. Open the page
Devices > Device wizard
.
2. Click
New
.
3. In the
Device template
list field, select a device template that matches the existing
door terminal.
4. Enter a name for the door terminal in the
Name
entry field.
5. In the
Module
and
Port
list fields, select the module and the port to which the door
terminal is connected.
6. Click
Save
.
7. Enter a new internal number in the
Phone number
entry field. Possible entries:
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers with more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
8. Enter the SIP password required by the connected device in the
SIP password
entry
field.
2 to 4 digits in the range of
10
to
9999
