COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
609
Settings
ISDN Connection
PBX Base Number/Bundle Settings
PBX Base Number/Bundle Settings
Proceed as follows:
•
Using the Configuration Manager (page
Public switched tel. networks > ISDN connec-
tions > PBX base numbers/trunk bundles
)
Requirements:
•
External S
0
port (optional, see Important Information > Product Details > Basic Assembly
and Extensions section)
•
Connection type PTP connection on external S
0
port
PBX base number
A PTP connection has a PBX base number (base number, header, base phone number) and
(Direct Dial In - DDI) extension numbers. The network provider assigns the phone numbers for
the connection. The phone number to be dialled is formed from the PBX base (DDI)
extension number.
Name
Freely selectable name. This name is used to identify the port within the PBX.
Extensions block (DDI numbers)
From
To
A PTP connection has a PBX base number (base number, header, base phone number) and
(Direct Dial In - DDI) extension numbers. The network provider assigns the phone numbers for
the connection. The phone number to be dialled is formed from the PBX base (DDI)
extension number.
Notes:
You can enter a zero both as a single number (e.g. 0 to 99, as is usually the
case) and as a digit in the set number of places in extension numbers (e.g.
00 to 99).
If linear call distribution for the PTP connection is enabled (page
Public
switched tel. networks > Call distribution
), and if the internal numbers
match the external extension numbers, the system automatically performs a
1:1 assignment for the extension numbers in the extensions block. If an
extension cannot be assigned, the fallback call distribution function is
enabled.
