588
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Settings
Internal Telephone Numbers
Assigning Group Members to a Group
Proceed as follows:
•
Using the configuration manager
1. Open the page
Groups > Phone numbers
.
2. Click
New
.
3. Enter a new internal number in the
from
entry field under
Phone numbers
. Possible
entries:
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers with more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
For entering a sequence of phone numbers enter the first and the last phone
number under
from
...
until
and click
Save
.
4. Enter a name for identification purposes in the
Name
entry field.
Note:
The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the phone number.
5. Click
Save
.
6. Repeat step 2 to 5 to enter additional numbers.
Assigning Group Members to a Group
A group is made up of internal end devices that are assigned to the group.
2 to 4 digits in the range of
10
to
9999
