472
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Functions
Number Presentation (Outgoing)
Configuring Number Presentation (Outgoing) for Subscriber
Number Presentation (Outgoing)
With this feature, it is possible to select the number presented to the partner called. A different
number may be presented for a business or a private call or for a call as a member of a group
(logged into the group as outgoing).
Configuring Number Presentation (Outgoing) for Subscriber
Proceed as follows:
•
Separately for subscribers
Note:
If differently configurable functions for private and business calls are
enabled, two different configurations can be created for each subscriber –
one for private calls and one for business calls (see also chapter Functions >
Private (Personalised) Exchange Line Access > Switching Differently Config-
urable Functions for Private and Business Calls On/Off).
•
Separately for configurations
•
Using the configuration manager
Note:
As described in the following, the setting is also possible via profiles (
...
> Profiles > Configuration > Configure > ...
). If the check box
Profile-
controlled settings
has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
•
Configured external numbers
1. Open the page
Subscriber (scr.) > Properties > Exchange line settings
.
2. In the list field at the top, select the subscriber in question by his name or number.
3. In the
Number presentation (outgoing) - business
and
Number presentation
(outgoing) - private
or
Number presentation (outgoing)
list fields, select one of the
following options: