COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
307
Functions
Alarm
Creating a Switch Input and Assigning it to the Alarm
A switch input used for this purpose can, for example, be part of a connected door terminal
(e. g. a still free door bell button). The switch input is created in the configuration of the PBX as
part of another device and is then assigned to the alarm. It then remains part of this other device
In the configuration of the PBX, but takes over the selected alarm function the alarm.
To detect that the alarm has been triggered, e. g. because a door bell button has been pressed,
the PBX needs to know which DTMF sequence or which SIP invite the connected device sends
in this case (see manual and settings of the device in question).
Note:
The DTMF sequence or the SIP invite usually is the phone number
assigned to the door bell button within the door terminal.
Proceed as follows:
•
Using the configuration manager
Requirements:
•
Switch input (optional, see chapter Important Information > Product Details > Basic
Assembly and Extensions)
•
Created Alarm
•
Created device (e. g. a door terminal) as whose part the switch input is to be created
1. Open the page
Devices > Alarms
.
2. Click the second under
Switch input+Relay
in the line for the corresponding
alarm.
Note:
If switch inputs have already been configured, a list field will appear
now. Select one of the existing switch inputs and click
. If you do not want
to use any of the existing switch inputs, select
New switch input
in the list
field.
3. Enter a name for the switch input in the
Name
entry field.
4. Enter the DTMF sequence/SIP invite which the connected device uses as signal in
the
DTMF sequence / SIP invite
entry field. Possible entries:
5. Select the device as whose part the switch input is to be created in the
Add to
list
field.
Digits and the characters * and #