COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
41
Important Information
Product Details
Basic Assembly and Extensions
•
Analogue telephones
•
Standard VoIP telephones (SIP)
Internal S
0
Port
An internal S
0
port (not included in the basic assembly) offers similar options as an ISDN
connection with the PTMP connection type and is suitable for connecting to the following end
devices:
•
COMfortel 1200/1400/1600/2600 system telephones (firmware version 1.6A, or later)
•
COMfortel 1100/1500/2500/2500 AB system telephones (firmware version 4.4I, or later)
•
COMfortel DECT 900 Bases for COMfortel DECT 900C/900
•
ISDN telephones in compliance with the Euro ISDN Standard (DSS1)
•
ISDN PC controllers in compliance with the Euro ISDN Standard (DSS1)
Important:
The power consumption of the end devices on an S
0
U
P0
port may
total a maximum of 4 W. A maximum of 40 W is available for all the a/b-, S
0
-
und U
P0
ports together.
During a call, the COMfortel 1400 and COMfortel 2600 allow you to accept
another call and record it simultaneously on the local answering machine.
When a second call is signalled as waiting, the PBX reserves the second call
channel of the internal S
0
port for this function. At this particular time, a
second telephone at the same port cannot initiate a call, accept an incoming
call and pick up a call. Simultaneous call acceptance and recording by the
local answering machine is not possible while another telephone is on a call
at the same port. In order to ensure that the full scope of functions is
available, you should connect only 1 telephone per port.