COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
577
Settings
Internal Telephone Numbers
Creating Analogue Subscribers
In the overview
Grouped by type
click for a type to list the configured
numbers.
Creating Analogue Subscribers
The analogue subscribers are on the end devices for which internal numbers are allocated and
that are connected to analogue ports. The phone numbers are used to access the end devices
via the PBX.
Proceed as follows:
•
Using the configuration manager
Requirements:
•
Internal analogue port (optional, see chapter Important Information > Product Details >
Basic Assembly and Extensions)
1. Open the page
Subscriber (scr.) > Phone numbers
.
2. Click
New
.
3. Enter a new internal number in the
from
entry field. Possible entries:
Note:
Double allocation of a number is not possible.
Using phone numbers with few digits (two or three-digit numbers) inevitably
restricts the possible supply of phone numbers with more digits. For
example, if the phone number 12 is assigned, the phone numbers 120-129
and 1200-1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
For entering a sequence of phone numbers enter the first and the last phone
number under
from
...
until
.
4. Enter a name for identification purposes in the
Name
entry field.
2 to 4 digits in the range of
10
to
9999
