V3.5 14/08/19
UD0089
Page 143
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
11.
Click on the System Config tab.
12.
You will see a list of cabinets that are attached to the system. A system comprises of a control pod and one or
more cabinets. By default there is one cabinet that has 6 receptor strips or rows. You must alter the cabinet
configuration to match that of your physical system as follows.
To edit the default cabinet, either double click on the cabinet in the list or click on Edit System.
Simply edit the Number of Rows and Columns to match that of the Cabinet in the System.
To Add a Cabinet, click on
.
To Remove a Cabinet, click on
.
To save the changes, click on
or
.