V3.5 14/08/19
UD0089
Page 499
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
Configuring the iFobs
1.
Job Reference Logging works on a per iFob basis. To enable this option right click the iFob you wish to setup
and select 'Edit iFob Details'.
2.
Select the 'iFob Details' page. There will be two tick options at the bottom of the window, Job Reference
Logging on Removal and Job Reference Logging on Return.
3.
Select which options you would like and click the Save & Close button.
NOTE:
It is unlikely that you would need to have both of these options enabled at the same time
however you can select them both if desired.
4.
When a user now attempts to remove or return the iFob one of the scenarios below will take place...
Job Reference Logging on Removal
With just this option enabled the user will only be prompted to enter a reference code before you remove the
iFob.
Job Reference Logging on Return
With just this option enabled the user will only be prompted to enter a reference code when returning the
iFob.
