Assa Abloy TRAKA32, User Manual

Page: 30 / 919

V3.5 14/08/19 UD0089 Page 30
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
2.3.2 WHAT YOU SHOULD HAVE
Every care is taken to ensure all parts necessary are shipped with your order. If you find any items missing from the
checklist below please contact Traka immediately.

Traka System – Your Traka system will be supplied with the correct number of receptor strips or locker
compartments as per your order. Each receptor socket (if applicable) will have an iFob in place. For RFID
lockers, RFID tags will be included with your system.

Master Lock Keys – Traka is supplied with a set of keys, which operate the lock to the control panel and
emergency door release.

Back up battery (UK deliveries only).
Depending on the way in which you have chosen to administer your Traka System you will be supplied with the
appropriate communication parts:
RS232

A supplied length of cable with 9 pin ’D’ plugs at either end.
RS485

An 'RS232 to RS485 Converter’ with patch lead for the PC.

A patch lead for each Traka system.

RS485 network cable category 5. (Supplied on request.)

RS485 network ports category 5 RJ45. (Supplied on request.)

RS485 installation guide .
Modem

Modem. (This may be pre-installed in the Traka system.)

Modem power cable and communication cable.

Modem user guide.

Modem installation guide .
Ethernet
If you are supplied with a Moxa Ethernet adaptor you should have the following…

Moxa Serial Port Server. (This may be pre - installed in the Traka system.)

Moxa Serial Port Server support CD.

Moxa Serial Port Server user guide.

Moxa Serial Port Server installation guide .

A patch lead (supplied on request).
If you have an onboard XPort Ethernet adaptor you should have the following…

XPort Serial Port Server installation guide .

A patch lead (supplied on request).