V3.5 14/08/19
UD0089
Page 81
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
9.
Use the keyboard arrow keys to highlight [Serialport] and press Enter.
10.
Using the keyboard set the following options...
a.
Baud Rate [9600] or [19200]
Set [9600] if the Control PCB is fitted with a 3MHz crystal or set [19200] if the Control PCB is fitted
with a 7MHz crystal. Please refer to the
b.
Parity [None]
c.
Data Bit [ 8 ]
d.
Stop Bit [ 1 ]
e.
Flow Control [None]
f.
UART FIFO [Enable]
11.
When complete press Esc to return to the top menu.
12.
When you are happy the configuration is correct, use the keyboard arrow keys to highlight [Restart] and
press Enter.
