V3.5 14/08/19
UD0089
Page 749
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
4.9.3.4
MINI 16 MANUAL IFOB RELEASE
In the event of total system failure you will need to remove various parts of the Mini 16 Traka System to gain access
to the iFobs / Keys.
NOTE:
On a Mini 16 system it is not possible to manually remove an iFob without removing PCBs and
various other components. Therefore this process describes how to access the keys and manually remove
them from the iFobs.
Tools required...
Heavy duty wire cutters.
1.
Switch off the mains power to the unit by removing the fuse from the fused spur or unplugging from the
mains.
2.
Use the Master Key to unlock the Cam Lock. The Control Panel is hooked in at the bottom and locked at the
top. Carefully begin to open the Control Panel. You will see the lock at the bottom of the panel, using your
finger release the Catch that holds the door shut.
3.
Using a heavy duty pair of wire cutters, cut the security seals that hold the keys to the iFobs.
4.
Please contact your supplier to have your Traka System repaired and tested.