Assa Abloy TRAKA32 User Manual Download Page 196

Page: 196 / 919

V3.5 14/08/19

UD0089

Page 196

This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"

Check Version

This communicates directly with the selected system to show the firmware version.

Check Serial Number

This communicates directly with the selected system to show the system serial number.

NOTE:

This option is only available with a firmware version of 6.06.01 or above.

Update iFob Status

This option will examine the state of each iFob in the system and update state information about each iFob
using transaction information.

This is the equivalent of reading the iFob Store in older versions of the firmware.

Before performing this operation, please ensure that 'Read All System Data' has successfully completed.

NOTE:

This option is only available with a firmware version of 6.07.00 or above.

Rebuild Store Data

This option will rebuild the iFob store data held internally for each iFob using the data that is currently held with
each iFob.

This can be useful if the information displayed on the LCD is inaccurate.

Before performing this operation, please ensure that 'Read All System Data' has successfully completed.

NOTE:

This option is only available with a firmware version of 6.07.00 or above.

Summary of Contents for TRAKA32
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands

Assa Abloy TRAKA32, User Manual

Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands