Assa Abloy TRAKA32 User Manual Download Page 630

Page: 630 / 919

V3.5 14/08/19

UD0089

Page 630

This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"

User Process

The user is given the ID number and approaches the system.

Press # on the keypad. The user will then be prompted to enter the User Identification Number they have
been provided.

If the ID number is correct the system will then prompt the user to swipe their ID card.

NOTE:

At this point the card number is stored in the system against the user profile as the primary

PIN. This information will be read back to Traka32 once the data has been read from the system.

Once the card number has been read and stored, the user can enter their own PIN followed by the # key.

NOTE:

At this point the PIN is stored in the system against the user profile as the secondary PIN.

This information will be read back to Traka32 once the data has been read from the system.

The process is now complete and you will receive a message on the LCD stating that the enrolment was
successful.

Now the user has completed this process, when they swipe their ID card and enter their PIN they can access
the system and

remove keys/iFobs

in the usual fashion.

Summary of Contents for TRAKA32
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands

Assa Abloy TRAKA32, User Manual

Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands