Assa Abloy TRAKA32 User Manual Download Page 687

Page: 687 / 919

V3.5 14/08/19

UD0089

Page 687

This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"

Firmware has advanced search enabled

This box will be checked if the firmware has the

advanced iFob search

option enabled. This only applies to

firmware version 6.07.23 and above.

Firmware has iFob release timer enabled

This box will be checked if the firmware has the

iFob release timer

option enabled.

Firmware has Sasol Secunda turbo facility enabled

This box will be checked if the firmware has the Sasol Secunda turbo facility enabled. For more details,
please refer to the

maintenance lockout facility

section.

Firmware has Sasol Sasolburg turbo enabled

This box will be checked if the firmware has the Sasol Sasolburg turbo facility enabled. For more details,
please refer to the

maintenance lockout facility

section.

Firmware has Sasol Sasolburg critical lockout facility enabled

This box will be checked if the firmware has the Sasol Sasolburg critical lockout facility enabled. For more
details, please refer to the

maintenance lockout facility

section.

Firmware has Sasol Secunda catalyst enabled

This box will be checked if the firmware has the Sasol Secunda catalyst option enabled. For more details,
please refer to the

maintenance lockout facility

section.

Firmware has Sasol Secunda oil enabled

This box will be checked if the firmware has the Sasol Secunda oil option enabled. For more details, please
refer to the

maintenance lockout facility

section.

Firmware has GSM Module interface enabled

This box will be checked if the firmware has the

GSM Module

interface enabled. This option is only available

with firmware version 6.07.33 and above.

Firmware has iFob return prompt enabled

This box will be checked if the firmware has the

iFob return prompt

option enabled.

Firmware has key booking by ref. enabled

This box will be checked if the firmware has the

key booking by reference

option enabled.

Summary of Contents for TRAKA32
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands

Assa Abloy TRAKA32, User Manual

Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands