V3.5 14/08/19
UD0089
Page 440
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
Viewing the Fault List
After returning your iFob to the cabinet go to the Traka32 software and Read All System Data, then at the top left of
the screen click View > Fault List.
You will notice there is now an outstanding fault stored in the iFPP tab waiting to be repaired or cleared (see below).
1.
The Fault ID box shows the unique number assigned to the fault by Traka32.
2.
The Fault number shows which Fault Code was logged against this particular transaction.
3.
This is the name of the fault that was given when creating the fault details.
4.
The User who logged the fault.
5.
The Date and time the fault was logged.
6.
The description of the Immobilisor the fault has been logged to.
7.
The Address of the Immobilisor.
8.
The Immobilisor Type.
9.
The repaired box (if ticked) shows that the Immobilisor has been repaired.
Double click the outstanding fault and the details window will appear. The greyed out section on the left is information
about the Immobilisor and the fault itself and is unchangeable at this point.
This window gives you the options of repairing the fault and/or clearing the fault, also there is a notes section at the
bottom were you can specify the work carried out on the vehicle. After selecting the appropriate options click the Save
& Close button in the top left corner.
