Assa Abloy TRAKA32 User Manual Download Page 458

Page: 458 / 919

V3.5 14/08/19

UD0089

Page 458

This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"

3.19.12.2

IFOB IN WRONG SLOT SYSTEM LOCKDOWN OPERATION

If a User has returned an iFob to the wrong slot, the LCD will show:

If the user chooses to ignore the "iFob in wrong slot" message and closes the door the system will enter a
"lockdown" state and the LCD will show:

Whilst in System Lockdown, only a Supervisor / a user with

Access Level 195

may open the system to clear

the condition. To clear the condition simply:

Access the system

in the usual way by card, biometrics or pin as applicable.

Remove the iFob from the wrong slot and return it to the correct slot.

Close the door if applicable.

The System Lockdown condition will have now cleared allowing normal users to access the system.

Summary of Contents for TRAKA32
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands

Assa Abloy TRAKA32, User Manual

Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands