V3.5 14/08/19
UD0089
Page 164
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
3.2
READ ALL SYSTEMS DATA
The transactions, alarms and events reports available from the Traka32 software are only as up to date as the last
time the system data was read.
To update the data from a single system, select the required system from the
drop down menu and click on
(shortcut key F9).
To update the data from all systems, simply click on
.
It is possible to configure the Traka32 software to automatically Read All System Data at regular intervals or a specific
time of the day. Please refer to the Auto Communication in the
NOTE:
It is good practice to Read All System Data as often possible. If a problem was to occur with a Traka System valuable
data may be lost if the data is not read.
Traka does have a limited amount of memory as with any system. If a Read All System Data is not done for a very
long period the memory may become full. When the memory becomes full, it will start to overwrite the oldest
information in order to keep the most recent information and data may be lost.
If a Traka System’s LCD starts displaying the ’Memory Almost Full’ message, the alarm and/or transaction memory
within the Traka System is nearing maximum capacity.
If a Traka System’s LCD starts displaying the ’WARNING: MEMORY FULL!!’ message, the alarm and/or transaction
memory within the Traka System has reached maximum capacity.