Assa Abloy TRAKA32 User Manual Download Page 39

Page: 39 / 919

V3.5 14/08/19

UD0089

Page 39

This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"

Disconnect the Green & Yellow Earth cable connector linking the Receptor Frame to the main cabinet.

Using a 2.5mm Allen Key, remove the screws holding the Receptor Frame in place.

Carefully slide the Receptor Frame to the right to free from the main cabinet and remove.

NOTE:

The receptor frame is heavy especially when fully loaded with keys.

The above preparation will have now revealed the 6 fixing holes that can be used to fix the system to a
suitable wall with suitable fixings.

10.

Now refer to the

S-Series Installation

section.

Summary of Contents for TRAKA32
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands

Assa Abloy TRAKA32, User Manual

Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands