Assa Abloy TRAKA32 User Manual Download Page 324

Page: 324 / 919

V3.5 14/08/19

UD0089

Page 324

This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"

3.12.5.6

CRYSTAL REPORTS - USERS

Standard User List

This report lists all of the users in the Traka database along with their

User details

i.e Staff Number, Position, Tel,

Email etc.

Software Access List

This report lists all of the users that have access to the Traka 32 software along with their

User details

i.e Staff

Number, Position, Tel, Email etc.

User by Region

This report lists all of the users and what regions they belong too along with their

User details

i.e Staff Number,

Position, Tel, Email etc.

User by Security Group

This report lists all of the users and what security groups they belong too along with their

User details

i.e Staff

Number, Position, Tel, Email etc.

User Active And Expiry Dates

This report listall of the users that are currently active and shows when their profile expires, along with their

User

details

i.e Staff Number, Position, Tel, Email etc.

User Without Access To Any System

This report has been written to list all users that do not have access to any system in your database.

Summary of Contents for TRAKA32
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands

Assa Abloy TRAKA32, User Manual

Search results

Summary of Contents for TRAKA32

Reviews:

Related manuals for TRAKA32

Brands by name

Popular brands