V3.5 14/08/19
UD0089
Page 459
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
3.19.13
INCORRECT IDENTIFICATION LOCKDOWN
This cost option allows the system to 'lockdown' when a user fails to correctly enter their access credentials within a
pre-defined number of attempts.
Setting up the System
To use this feature it will need to be enabled with the system configuration file.
If you are using a brand new system that was ordered with this feature, then this will already be configured for you. If
you would like to add this option to an existing system, you will need a new configuration file created by Traka and
loaded into your system. Please contact Traka for further details.
1.
Right click the pod from the
2.
Navigate to the System page. The option 'Firmware Relay Lock-out Facility Enabled' option will be ticked.
3.
Using the sliding toolbar set the duration of the lockdown in increments on 1 minute. The maximum amount
of time the system can be in 'Lockdown' is 30 minutes.
NOTE:
When 0 is selected the lockdown feature is disabled.
4.
The Relay Count relates to how many tries a user will have correctly identify themselves at the system before
it locks down.
- Selecting 00 will set the count to 0 and mean that no retries are allowed.
-
-
-
-
-
- Selecting 07 will set the count to 7 tries before the system locks down.
5.
Select the next button until you reach the end of the Configuration Wizard and click Apply. The configuration
file will then write to the system.
6.
Once communication is completed click Finish.