V3.5 14/08/19
UD0089
Page 435
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
3.19.5.7
CLEARING AND REPAIRING FAULTS
Faults can be cleared at the Traka system when returning the iFob, and can also be cleared or repaired from Traka32.
Once a fault has been cleared it will disappear from the Outstanding Faults list. When a fault is marked as repaired, it
will remain in the list but will be highlighted as repaired and shown in the system viewer with a pink spanner icon.
When faults are cleared the system will generate a ‘Fault Cleared’ iFob event.
Clearing and Repairing Faults in Traka32
1.
From the main menu click on View, Fault List.
2.
Select the Outstanding Faults tab.
3.
From the Outstanding Faults List select the Fault you wish to clear or mark as repaired, and then click on the
Faults menu followed by Clear Fault.
N
OTE:
Faults shown in Red are critical, faults shown in Yellow are non-critical.
4.
The Outstanding Fault window will appear. From hear you can select either ‘Fault Cleared’ or ‘Fault Repaired’
by checking the corresponding tick box, and also add details of any work carried out.
Fault Cleared: Selecting ‘Fault Cleared’ will remove the fault from the iFob and delete the Outstanding Fault
record from the list.