V3.5 14/08/19
UD0089
Page 600
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
3.19.24
MICRO TRAKA
3.19.24.1
MICRO TRAKA OVERVIEW
Micro Traka is an extension to Traka that places the keys in separate units that are located close to each door that the
system provides access to, rather than having the keys attached to each iFob in the cabinet. When a user takes an
iFob from the cabinet, it is programmed with their profile that determines which Micro Traka units they have access to.
To access the key held in the Micro Traka unit, the user places their iFob in to the appropriate slot and, if the
permissions match, the user can extract the iFob with the key attached. When the user returns the key, history
information is written in to the user's iFob that is downloaded to Traka32 when the user eventually returns the iFob to
the cabinet. A history for each user is then built up, showing to which units and at what times the user has been.
When integration with Micro Traka is enabled in the software, a global Site Code, Office Code and Building Code are
specified, together with the Emergency Sequence to release the iFobs from the unit. These settings are applied to all
Micro Traka Units that are programmed by iFobs extracted from the cabinet. For a user to be granted access to the
key in the Micro Traka Unit, the Site Code, Office Code and Building Code must match.
Each Micro Traka unit is then programmed with an Address and, optionally, a Type. This allows fine control over which
keys a user may have access to.
Using the Micro Traka System
To enable Integration with Micro Traka, use the
To create a Micro Traka Unit configuration iFob, use the
