HD-CVI Camera
User’s Manual
Welcome
Thank you for purchasing our HD-CVI camera!
This user’s manual is designed to be a reference
tool for your system. Please read the following
safeguards and warnings carefully before you use
this series of product!
Please keep this user’s manual for future
reference!
Important Safegaurds and warnings
1.Electrical Safety
All installation and operation should conform to your local
electrical safety codes. The power shall conform to the
requirement in the SELV (Safety Extra Low Voltage) and the
Limited power source is rated 12V DC (24V AC) in the
IEC60950-1. We assume no liability or responsibility for any
fires or electrical shock caused by improper handling or
installation.
2.Transportation Security
Heavy stress, violent vibration or water splash are not
recommended during transportation, storage, and
installation.
3.Installation
Do not apply power to the camera before completing
installation. Please install the proper power cut-off device
during the installation connection. Always follow the
instruction guide the manufacturer recommended. If this
product is installed in the ceiling, please make sure this
installation position can sustain the min 11 Lbs.
4.Qualified Engineers Needed
All the examination and repair work should be done by a
qualified service engineer. We are not liable for any
problems caused by unauthorized modifications or
Important Safegaurds and warnings
attempted repair.
5.Environment
This series camera should be installed in a cool, dry place
away from direct sunlight or strong light, inflammable,
explosive substance and etc. This series camera should be
used in the specified working temperature. Please keep it
away from electromagnetic radiation enviroments. Please
keep the camera ventilated. Do not allow water and other
liquid into the camera.
6.Accessories
Be sure to use all the accessories recommended by the
manufacturer. Before installation, please open the package
and check all the components that are included. Contact
your local retailer ASAP if something is broken in your
package.
7.Daily Maintenance
Please shut down the device and then unplug the power
cable before you begin daily maintenance work. Use the dry
soft cloth to clean the device. If there is too much dust,
please use water to dilute the mild detergent first and then
use it to clean the device. Finally use the dry cloth to clean
the device. Please put the dustproof cap on to protect the
CCD (CMOS) component when you do not use the camera.
1
General Introduction
1.1 Overview
This series megapixel HD camera conforms to the
HD-CVI standard. It supports high-speed, long-dis-
tance video transmission without any delay. It can be
controlled by the DVR conforming to HD-CVI.
1.2 Features
• High-performance CMOS image sensor, megapixel
definition.
• Support HD video and control signal coaxial
transmission.
• Supports 75-3 coaxial cable transmission without any loss.
720p series transmission distance over 500m, 1080p series
transmission distance 300m.
• High speed, long distance real-time transmission
• Support HD-CVI HD.
• 720p series supports 720p@30fps
• 1080p series support 1080p@30fps
• Supports high performance 3D noise reduction; excellent
performance in low illumination.
• Support ICR switch to realize surveillance both in the
daytime and at night.
• Support OSD (on-screen display), suitable for user
self-defined setup, except on economy models.
• Supports DC12V power supply.
• IP66 compliance.
• Supports intelligent IR function.
2
Dome Framework
Important
Dimensions of Cameras may vary depending on your
model. If you are having trouble finding the dimensions
you can find the measurements by using a caliper or a
ruler. To find the circumference of the bottom of the
camera use the following formula: Diameter of circle x
3.14(pi)
HD-CVI Metal Housing
Lens
Dome Body
Decoration Ring
Power
Video
SD/HD switch control cable
2.1
HD-CVI Plastic Housing
Lens
Dome Body
Decoration Ring
2.2
3
Dome Installation
Important
Before the installation, please make sure the installation
surface can sustain at least 3 times the weight of the
bracket and the camera.
HD-CVI Metal Housing
B1 Pedestal
B2 Pan Base
B3 Rotate Base
B4 Dome Body
Pedestal 1
HD-CVI Glass Housing
Dome Cover
Dome Enclosure
IR Light
Dome Module
Dome Pedestal
Power Input Port
Video Output Port
SD/HD Switch Cable
2.3
HD-CVI Plastic Housing
Ceiling or Wall
Expansion Bolt
Dome Camera Body
ST3 Self-tapping Screws
Decoration Ring
Step 1
Please take the installation position map from the
accessories bag, and then paste it on the ceiling or the
wall according to your monitor area requirements. Draw
and then drill three holes in the installation surface and
then insert three expansion bolts in the holes. Secure
these three bolts firmly.
Step 1 Adjust Monitor Angle
Turn the pan base to the pedestal to loosen or secure
firmly. Adjust and rotate base and the dome body to
get the lens to the proper monitor angle.
