Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 729 / 796

Operating Manual 1164.4556.12 - 06 6.335
R&S FSP Remote Control – Description of Commands
Alphabetical List of Remote Commands
[SENSe<1|2>:]FREQuency:SPAN:FULL 6.168
[SENSe<1|2>:]FREQuency:STARt 0 to fmax 6.168
[SENSe<1|2>:]FREQuency:STOP 0 to fmax 6.169
[SENSe<1|2>:]LIST:POWer:RESult? 6.171
[SENSe<1|2>:]LIST:POWer[:SEQuence] <analyzer freq>,<ref level>,<rf att>,<el
att>, <filter type>, <rbw>, <vbw>, <meas
time>,<trigger level> 6.171
[SENSe<1|2>:]LIST:POWer:SET <PEAK meas>,<RMS meas>,<AVG
meas>,<trigger mode>,<trigger
slope>,<trigger offset>, <gate length> 6.174
[SENSe<1|2>:]LIST:POWer:SET:AVERage:TYPE LINear | LOGarithmic 6.175
[SENSe<1|2>:]LIST:POWer:STATe OFF 6.175
[SENSe<1|2>:]LIST:RANGe<1...20>:BANDwidth[:RESolution] <numeric_value> 6.175
[SENSe<1|2>:]LIST:RANGe<1...20>:BANDwidth:VIDeo <numeric_value> 6.175
[SENSe<1|2>:]LIST:RANGe<1...20>:BREak ON | OFF 6.175
[SENSe<1|2>:]LIST:RANGe<1...20>:COUNt? 6.176
[SENSe<1|2>:]LIST:RANGe<1...20>:DELete 6.176
[SENSe<1|2>:]LIST:RANGe<1...20>:DETector APEak | NEGative | POSitive | SAMPle |
RMS | AVERage 6.176
[SENSe<1|2>:]LIST:RANGe<1...20>:FILTer:TYPE NORMal | CHANnel | RRC | PULSe 6.176
[SENSe<1|2>:]LIST:RANGe<1...20>[:FREQuency]:STARt <numeric_value> 6.176
[SENSe<1|2>:]LIST:RANGe<1...20>[:FREQuency]:STOP <numeric_value> 6.177
[SENSe<1|2>:]LIST:RANGe<1...20>:INPut:ATTenuation <numeric_value> 6.177
[SENSe<1|2>:]LIST:RANGe<1...20>:INPut:ATTenuation:AUTO ON | OFF 6.177
[SENSe<1|2>:]LIST:RANGe<1...20>:INPut:GAIN:STATe ON | OFF 6.177
[SENSe<1|2>:]LIST:RANGe<1...20>:LIMit -200dB to +200dB 6.177
[SENSe<1|2>:]LIST:RANGe<1...20>:LIMit:STATe ON | OFF 6.178
[SENSe<1|2>:]LIST:RANGe<1...20>:POINts <numeric_value> 6.178
[SENSe<1|2>:]LIST:RANGe<1...20>:RLEVel <numeric_value> 6.178
[SENSe<1|2>:]LIST:RANGe<1...20>:SWEep:TIME <numeric_value> 6.178
[SENSe<1|2>:]LIST:RANGe<1...20>:SWEep:TIME:AUTO ON | OFF 6.179
[SENSe<1|2>:]LIST:RANGe<1...20>:TRANsducer <string> 6.179
[SENSe<1|2>:]MIXer:BIAS:HIGH <numeric_value> 6.180
[SENSe<1|2>:]MIXer:BIAS[:LOW] <numeric_value> 6.180
[SENSe<1|2>:]MIXer:HARMonic 2 to 64 6.180
[SENSe<1|2>:]MIXer:HARMonic:BAND A|Q|U|V|E|W|F|D|G|Y|J|USER 6.181
[SENSe<1|2>:]MIXer:HARMonic:TYPE ODD | EVEN | EODD 6.181
[SENSe<1|2>:]MIXer:LOPower <numeric_value> 6.181
[SENSe<1|2>:]MIXer:LOSS:HIGH <numeric_value> 6.181
[SENSe<1|2>:]MIXer:LOSS[:LOW] <numeric_value> 6.182
[SENSe<1|2>:]MIXer:LOSS:TABLe:HIGH <file_name> 6.182
[SENSe<1|2>:]MIXer:LOSS:TABLe[:LOW] <file_name> 6.182
[SENSe<1|2>:]MIXer:PORTs 2 | 3 6.182
[SENSe<1|2>:]MIXer:SIGNal ON | OFF | AUTO | ALL 6.183
[SENSe<1|2>:]MIXer[:STATe] ON | OFF 6.183
[SENSe<1|2>:]MIXer:THReshold <numeric_value> 6.183
[SENSe<1|2>:]MPOWer:RESult[:LIST]? 6.185
[SENSe<1|2>:]MPOWer:RESult:MIN? 6.186
[SENSe<1|2>:]MPOWer[:SEQuence] <analyzer freq>,<rbw>,<meas
time>,<trigger source>,
<trigger level>,<trigger offset>,<type of
meas>,<# of meas> 6.186
[SENSe<1|2>:]POWer:ACHannel:ACPairs 0 to 12 6.190
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth:ACHannel 100 Hz to 1000 MHz 6.190
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth:ALTernate<1...11> 100 Hz to 1000 MHz 6.190
[SENSe<1|2>:]POWer:ACHannel:BANDwidth|BWIDth[:CHANnel] 100 Hz to 1000 MHz 6.191
Command Parameter Page