Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 432 / 796

R&S FSP Remote Control – Description of Commands
CALCulate Subsystem
6.38 Operating Manual 1164.4556.12 - 06
Characteristics: *RST value: 0
SCPI: device-specific
Mode: A
CALCulate<1|2>:LIMit<1...8>:CONTrol:SHIFt <numeric_value>
This command moves a limit line by the indicated value in x direction. In contrast to
CALC:LIM:CONT:
OFFS
, the line is shifted by modifying the individual x values and not by means of an additive offset.
The shift is independent of the measurement window.
In analyzer mode, the unit of values depends on the frequency or time domain of the x-axis, i.e. it is
HZ with
CALC:LIM:CONT:DOM FREQ and S with CALC:LIM:CONT:DOM TIME.
Example:
"CALC:LIM2:CONT:SHIF 50KHZ"
'Shifts all reference values of limit line 2 by 50 kHz.
Characteristics: *RST value: --
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:LIMit<1...8>:CONTrol:SPACing LINear | LOGarithmic
This command selects linear or logarithmic interpolation for the calculation of limit lines from frequency
points.
Example:
"CALC:LIM:CONT:SPAC LIN"
Characteristics: *RST value: LIN
SCPI: device-specific
Mode: A