Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 712 / 796

R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
6.318 Operating Manual 1164.4556.12 - 06
R&S
FSP FSE [SENSe<1|2>:]POWer:ACHannel:REFerence:
AUTO ONCE
R&S
FSP FSE [SENSe<1|2>:]POWer:ACHannel:SPACing[:
ACHannel] 100Hz to 2000MHz different parameter
range
R&S
FSP [SENSe<1|2>:]POWer:CHannel:SPACing:
CHANnel 100Hz to 2000MHz new function for
R&S FSP
FSE [SENSe<1|2>:]POWer:ACHannel:SPACing[:
UPPer] 0 to 1000MHz not available for
R&S FSP and FSET
R&S
FSP FSE [SENSe<1|2>:]POWer:ACHannel:SPACing:
ALTernate<1|2> 100Hz to 2000MHz different parameter
range
R&S
FSP [SENSe<1|2>:]POWer:ACHannel:TXCHannel:
COUNt 1 | 2 | 3 | 4 new function for
R&S FSP
R&S
FSP [SENSe<1|2>:]POWer:ACHannel:REFerence:
TXCHannel:AUTO MINimum | MAXimum |
LHIGhest new function for
R&S FSP
R&S
FSP [SENSe<1|2>:]POWer:ACHannel:REFerence:
TXCHannel:MANual 1 to 12 new function for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]POWer:BANDwidth|BWIDth 10 to 99.9PCT different parameter
range
R&S
FSP [SENSe<1|2>:]POWer:HSPeed ON | OFF new function for
R&S FSP
R&S
FSP [SENSe<1|2>:]POWer:NCORrection ON | OFF new function for
R&S FSP
R&S
FSP [SENSe<1|2>:]POWer:TRACe 1 to 3 new function for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]ROSCillator:[INTernal:]TUNe 0 to 4095
R&S
FSP FSE [SENSe<1|2>:]ROSCillator:[INTernal:]TUNe:SAVe
FSE [SENSe<1|2>:]ROSCillator:EXTernal:FREQuency 1MHz to 16MHz not available for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]ROSCillator:SOURce INTernal | EXTernal
FSET/
ESIB [SENSe<1|2>:]SCAN<:RANGes[COUNt] 1 to 10 not available for
R&S FSP
FSE/
ESIB [SENSe<1|2>:]SCAN<1...10>:BANDwidth:
RESolution f
min
to f
max
not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]SCAN<1...10>:INPut:ATTenuation dB
min
to dB
max
not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]SCAN<1...10>:INPut:ATTenuation:
AUTO ON | OFF not available for
R&S FSP
FSET [SENSe<1|2>:]SCAN<1...10>:INPut:BIMPedance 150OHM | 600OHM |
10kOHM not available for
R&S FSP
FSET [SENSe<1|2>:]SCAN<1...10>:INPut:GAIN 0dB to 30dB not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]SCAN<1...10>:INPut:GAIN:AUTO ON | OFF not available for
R&S FSP
Devices Command (Sheet 39 of 47) Parameter Notes