Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 628 / 796

R&S FSP Remote Control – Description of Commands
TRACe Subsystem
6.234 Operating Manual 1164.4556.12 - 06
6.20 TRACe Subsystem
The TRACe subsystem controls access to the instrument's internal trace memory.
6.20.1 General Trace Commands
TRACe<1|2>:COPY TRACE1| TRACE2| TRACE3 , TRACE1| TRACE2| TRACE3
This command copies data from one trace to another. The second operand describes the source, the
first operand the destination of the data to be copied.
The numeric suffix at TRACe<1|2> selects the measurement window.
Example:
"TRAC:COPY TRACE3,TRACE1"
Characteristics: *RST value: -
SCPI: conform
Mode: A
This command is an event and therefore has no query and no *RST value.
TRACe<1|2>[:DATA] TRACE1 | TRACE2 | TRACE3 | LIST | SPURious | ABITstream | PWCDp |
CTABle, <block> | <numeric_value>
This command transfers trace data from the control computer to the instrument, the query reads trace
data out of the instrument.
The numeric suffix at TRACe<1|2> selects the measurement window.
Parameter: TRACE1 to TRACE3 selects trace 1 to 3.
LIST reads the peak list in the spurious measurement LIST EVALUATION (for
details on this measurement see page 220).
The suffix at TRACe<1|2> is irrelevant.
As results a list of <result of range 1>,< result of range 2>,..< result of range n> are
returned.
Every single range has following format:
<No>,<Start>,<Stop>,<rbw>,<freq>,<Levelabs>,<Levelrel>,<Delta>,
<Limitcheck>,<unused1>,<unused2>
Where:
No
Range number
Start Range start frequency
Stop Range stop frequency
Rbw Resolution bandwidth
Freq Frequency of the peak in the range
Levelabs Absolute peak power of the range in dBm
Levelrel Reserved (0.0)
Delta Delta of the peak power to the limit line in dB
Limitcheck Limit check state (0 = PASSED, 1 = FAILED)
Unused1 Reserved (0.0)
Unused2 Reserved (0.0)