Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 267 / 796

Operating Manual 1164.4556.12 - 06 4.195
R&S FSP Instrument Functions
Basic Settings
The SAVE / RECALL table contains the entry fields for editing the data set.
Remote command:
MMEM:STOR:STAT 1,"a:\test02"
MMEM:LOAD:STAT 1,"a:\test02"
SAVE FILE The SAVE FILE softkey sets the focus on the File Name field to enter a conforming
file name.
RECALL FILE The RECALL FILE softkey sets the focus on the Files field to choose a stored file to
restore.
SELECT PATH The SELECT PATH softkey sets the focus on the Path field and opens the pull-down
list to choose the correct path to store the file.
SELECT FILE The SELECT FILE softkey sets the focus on the Files field to choose a already
stored file. In addition, the DELETE softkey is displayed. The list Files lists all data
sets which are stored in the selected directory.
Remote command:
--
EDIT FILE
NAME
The EDIT FILE NAME softkey sets the focus on the File Name field and.
In the Save dialog box, the field already contains a suggestion for a new name: the
file name used in the last saving process is counted up to the next unused name.
For example, if the name last used was "test_004", the new name "test_005" is sug-
gested, but only if this name is not in use. If the name "test_005" is already in use,
the next free name is suggested, e.g. "test_006". You can change the suggested
name to any name conform to the following naming conventions.
The name of a settings file consists of a base name followed by an underscore and
three numbers, e.g. "limit_lines_005". In the example, the base name is "limit_lines".
The base name can contain characters, numbers and underscores. The file exten-
sion is added automatically and can not be changed.
EDIT
COMMENT
The EDIT COMMENT softkey activates the entry of commentary concerning the cur-
rent data set. The focus is set on the Comment field and an on-screen keyboard
opens.
Remote command:
MMEM:COMM "Setup for FM measurement"
Path Directory in which the data set is stored.
Files List of data sets already stored.
File Name Name of data set.
The name can be entered with or without drive name and directory; the
drive name and directory, if available, will then appear in the Path field.
The extension of the data name is ignored.
Comment Comment regarding the data set.
Items Selection of settings to be stored/loaded.
For further information on how to enter the comment text via the front panel of the
unit, see the Quick Start Guide, chapter 4, “Basic Operation”.