Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 686 / 796

R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
6.292 Operating Manual 1164.4556.12 - 06
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:MAXimum:
RIGHt
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:MAXimum[:
PEAK]
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:MINimum:LEFT
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:MINimum:NEXT
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:MINimum:RIGHt
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:MINimum[:
PEAK]
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:PEXCursion <numeric_value>
FSE CALCulate<1|2>:MARKer<1...4>:READout MPHase | RIMaginary not available for
R&S FSP
FSE CALCulate<1|2>:MARKer<1...4>:
SCOupled[STATe] ON | OFF not available for
R&S FSP
FSE CALCulate<1|2>:MARKer<1...4>:STEP:AUTO ON | OFF not available for
R&S FSP
FSE CALCulate<1|2>:MARKer<1...4>:STEP[:
INCRement] <numeric_value> not available for
R&S FSP
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:TRACe 1 to 3 R&S FSP: 3 traces are
available per screen
FSE: 4 traces are
available in full screen
mode and 2 traces per
screen in split screen
mode
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:X 0 to MAX (frequency |
sweep time) additional unit SYM is
available for FSE
R&S
FSP CALCulate<1|2>:MARKer<1...4>:X:SLIMits:LEFT 0 to MAX (frequency |
sweep time) new function for
R&S FSP. Replaces
DISP:FLIN and DISP:
TLIN commands of the
FSE
R&S
FSP CALCulate<1|2>:MARKer<1...4>:X:SLIMits:RIGHt 0 to MAX
(frequency|sweep time) new function
forR&S FSP. Replaces
DISP:FLIN and DISP:
TLIN commands of the
FSE
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:
STATe] ON | OFF
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:Y?
R&S
FSP CALCulate<1|2>:MARKer<1...4>:Y:PERCent <numeric_value> new function for
R&S FSP
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>[:STATe] ON | OFF
Devices Command (Sheet 13 of 47) Parameter Notes