Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 255 / 796

Operating Manual 1164.4556.12 - 06 4.183
R&S FSP Instrument Functions
Basic Settings
• Check whether the application with the maximum MAX MEM value is still required.
Disable this application if it is not required to reduce the worst case memory
allocation.
• Reduce the base memory allocation by reducing the number of enabled
applications with a MIN MEM value unequal to 0.
The available system memory is displayed at the bottom line.
You can disable this memory checking by activating the function EXPERT MODE.
Remote command:
*OPT?
OPTIONS
INSTALL
OPTION
The INSTALL OPTION softkey opens the data entry for the license keycode of a
firmware option.
On entry of a valid license key the message OPTION KEY OK is displayed in the
status line and the firmware option appears in table FIRMWARE OPTIONS .
On entry of an invalid license key the message OPTION KEY INVALID is displayed
in the status line.
Remote command:
--
REMOVE
OPTION
The REMOVE OPTION softkey removes all firmware options from the instruments.
Execution of this function must be confirmed in a message box in order to avoid
removal of the firmware options by mistake.
Remote command:
--
Emulation of the Instrument Front Panel
SOFT
FRONTPANEL
The SOFT FRONTPANEL softkey switches the display of the front panel keys on
and off.
When the front-panel keys are displayed on the screen, the instrument can be con-
trolled by clicking the respective button with the mouse. This is especially useful
when the instrument in a different site is controlled via a remote-control program,
such as, for instance, the remote desktop of Windows XP, and the screen contents
are transferred to the controller via remote link (see the Quick Start Guide
6 , “ LAN
Interface” ).
INSTALL OPTION
REMOVE OPTION