Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 268 / 796

R&S FSP Instrument Functions
Basic Settings
4.196 Operating Manual 1164.4556.12 - 06
SELECT ITEMS The SELECT ITEMS softkey moves the selection bar to the first line, left column of
the Items field. An entry is selected. Position the entry focus to the corresponding
partial data set using the cursor keys and then press the ENTER key in the desired
line. The selection is cleared by pressing the key again.
The following submenu is opend:
Remote command:
MMEM:SEL:HWS ON
(Current Settings)
MMEM:SEL:LIN:ALL ON
(All Limit Lines)
MMEM:SEL:TRAC ON
(All Traces)
MMEM:SEL:SCD ON
(Source Cal Data)
MMEM:SEL:TRAN:ALL ON
(All Transducers)
Note that the command
MMEM:SEL:SCD ON
(Source Cal Data) is only available
with option R&S FSP-B09 or R&S FSP-B10.
The Save dialog box offers the following selectable data subsets in the Items field.
SELECT ITEMS
ENABLE ALL ITEMS
DISABLE ALL ITEMS
Current Settings These settings include:
• current configuration of general instrument parameters
• current measurement hardware settings
• active limit lines:
A data set may contain maximum 8 limit lines for each
window. It always contain the activated limit lines and the
de-activated limit lines used last, if any. Consequently, the
combination of the restored deactivated limit lines depends
on the sequence of use with command
MMEM:LOAD
.
• the activated transducer factor
• user-defined color settings
• configuration for hardcopy output
• active transducer set:
A data set may contain maximum 4 transducer factors. It
always contain the activated factors and the factors used
and de-activated last, if any. Consequently, the combination
of the restored deactivated transducer factors depends on
the sequence of use with the command
MMEM:LOAD
.
• settings of tracking generator
(only with option R&S FSP B9)
All Limit Lines all limit lines
All Transducer all transducer factors
All Transducers all transducer
All Traces all traces which are not blanked
Source Cal Data correction data for tracking generator
(only with options R&S FSP B9 or R&S FSP B10)