Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 701 / 796

Operating Manual 1164.4556.12 - 06 6.307
R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
FSE MMEMory:SELect[:ITEM]:CVL[:ACTive] ON | OFF not available for
R&S FSP and FSET
R&S
FSP FSE MMEMory:SELect[:ITEM]:DEFault
FSE MMEMory:SELect[:ITEM]:GSETup ON | OFF not available for
R&S FSP (default
setting on the R&S FSP)
FSE MMEMory:SELect[:ITEM]:HCOPy ON | OFF not available for
R&S FSP (default
setting on the R&S FSP)
R&S
FSP FSE MMEMory:SELect[:ITEM]:HWSettings ON | OFF
R&S
FSP FSE MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF
FSE MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF
FSE MMEMory:SELect[:ITEM]:LINes[:ACTive] ON | OFF not available for
R&S FSP (default
setting on the R&S FSP)
FSE MMEMory:SELect[:ITEM]:MACRos ON | OFF not available for
R&S FSP
R&S
FSP FSE MMEMory:SELect[:ITEM]:NONE
R&S
FSP FSE MMEMory:SELect[:ITEM]:SCData ON | OFF
R&S
FSP MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON | OFF no numeric suffixes
behind TRACe
FSE MMEMory:SELect[:ITEM]:TRACe<1...4> ON | OFF numeric suffixes behind
TRACe
FSE MMEMory:SELect[:ITEM]:TRANsducer:ALL ON | OFF not available for
R&S FSP
FSE MMEMory:SELect[:ITEM]:TRANsducer[:ACTive] ON | OFF not available for
R&S FSP
R&S
FSP FSE MMEMory:STORe:STATe 1,path
R&S
FSP FSE MMEMory:STORe:TRACe 1 to 3,path
FSE OUTPut:AF:SENSitivity <numeric_value> not available for
R&S FSP and FSET
FSE OUTPut:UPORt<1|2>:STATe ON | OFF not available for
R&S FSP
FSE OUTPut:UPORt<1|2>[:VALue] #B00000000 to
#B11111111 not available for
R&S FSP
R&S
FSP FSE OUTPut<1|2>[:STATe] ON | OFF
FSE READ:BURSt:FERRor:AVERage? not available for
R&S FSP and FSET
Devices Command (Sheet 28 of 47) Parameter Notes